北京志鴻恒拓科技有限公司
曹

507533684*Analytical Technology Inc.Model Q46CT 導電率儀
歡迎前來詢價
公司旗下E歐洲備件采購網*三零服務：零起訂量+零中間環節+*=內專業的歐洲備件采購服務！*Analytical Technology Inc.Model Q46CT 導電率儀

環形電導率監測系統包含各種功能和選項，以實現幾乎所有的電導率監測和控制應用。雖然不適合低電導率測量，但環形監測器是高導電率應用的佳選擇。 ATI的Q46平臺代表了一代的監控和控制系統?？刂乒δ芤褦U(kuò)展到包括一個可選的第三個模擬輸出或一個額外的低功率繼電器組。數字通信選件現在包括Profibus DP，Modbus RTU或Ethernet-IP變體。

ATI的Q46CT型環形電導率系統專為在線監測化學侵蝕性工藝解決方案而設計。該傳感器由兩個屬帶狀線圈組成，通過傳感器外殼材料固定。傳動線圈在傳感器本體周?chē)?qiáng)磁場，在處理溶液中感應電流。傳感線圈用于測量過程溶液中的感應電流。這個電流的大小與工藝溶液的電導率成正比。

Noryl提供環形傳感器，以確保傳感器接液材料對強酸和強堿都具有化學抗性。傳感器材料也是不導電的，從而將傳感器與可能影響測量完整性的電噪聲和接地回路隔離。這種材料還使傳感器耐電極涂層，因?yàn)榇蠖鄶?shù)物質不會粘附在傳感器材料上。

傳感器可以使用傳感器背面的¾“NPT管螺紋進行浸入式安裝，以便于安裝在敞開的容器中。傳感器也可以使用特殊的2”CPVC T型接頭進行管道安裝，該接頭帶有一個對準鍵，可以自動定位傳感器到樣品流。

傳感器主體中的Pt1000 RTD為電導率測量的顯示和自動溫度補償提供溫度輸入。

特征

直接顯示化學濃度的濃度版本
擴展板添加第三個4-20毫安模擬輸出或添加三個額外的非隔離低功率繼電器
范圍廣泛，可選范圍0-200.0μs，高0.2.000 S，提供大的應用靈活性
電源選項包括通用100-240 VAC±10％或12-24 VDC
兩個隔離的4-20 mA輸出是標準配置，如果需要，還可以選擇第三個輸出。默認設置提供了電導率和溫度的模擬輸出
標準PID控制功能可分配給一個模擬輸出
提供Profibus DP，Modbus RTU或以太網IP
三個SPDT繼電器是標準的繼電器功能，可編程報警，控制或故障指示。三個額外的低功率繼電器可供選擇。
NEMA 4X（IP-66）外殼適用于墻壁，管道或面板安裝
黑光大LCD顯示屏在任何照明條件下都能提供清晰的視野。顯示屏上滾動的第二行提供了附加信息和編程提示。
電導率監測儀可用于監測和顯示各種化學過程應用中使用的濃度或酸或堿。 Q46CT具有預裝表格，可直接顯示溶液或氯化鈉（NaCl），鹽酸（HCl），氫氧化鉀（KOH）和氫氧化鈉（NaOH）的濃度。

除了這些標準表格之外，用戶可以輸入他們自己的用于其他化學品的表格數據，或者可以編輯由ATI提供的標準表格。定制表格需要濃度與電導率以及感興趣的化學品的溫度與電導率的數據。

規格 - 監視器

顯示范圍0-200.0μs，0-2000 / 20.00 / 200.0 / 2000mS，0-2000S
精度為選定范圍的0.5％或0.02 ppm
重復性0.3％的選定范圍或0.01 ppm
非線性度選定范圍的0.1％
溫度漂移
量程的0.01％/℃
功率100-240 VAC，±10％，50/60 H
12-24 VDC，大500 mA
模擬輸出
兩個隔離的4-20 mA，大負載500Ω，第三個輸出可選
繼電器三個SPDT @ 250 VAC， @ 24 VDC，3個附加SPST非隔離1A @ 30 VDC可選
顯示4位數字，0.75“數字LCD，12位數字第二行，LED背光
外殼NEMA 4X聚碳酸酯V-0可燃性
運行條件
-4到140ºF
靈敏度跨度的0.05％或0.01 mS
數字輸出
Profibus DP，Modbus RTU，以太網IP
安裝標準壁掛安裝套件，面板安裝支架和管道U型螺栓
尺寸5.6“x 4.9”x 6.4“
規格 - 傳感器

傳感器環形電感
材料改性聚苯醚
傳感器電纜20英尺標準，大200英尺
溫度范圍0-105°C，流通池溫度0-50°C
壓力限制0-150 psig
連接¾“MNPT后部螺紋
Flowcell 2“帶定位鍵的CPVC
訂購信息

其他配置如需定價，請致電AFC International，：1-，219-987-6825或傳真219-987-6826或電郵sales@afcintl.com

描述
目錄號
Q45CT環形/電導率監測器，2

Toroidal conductivity Monitoring Systems contain a variety of features and options to meet virtually any conductivity monitoring and control application. While not suitable for low level conductivity measurement, toroidal monitors are and excellent choice for high conductivity applications. ATI's Q46 platform represents the latest generation of monitoring and control systems. Control features have been expanded to include an optional 3rd analog output or an additional bank of low power relays. Digital communication options now include Profibus DP, Modbus RTU or Ethernet-IP variations.

ATI's Model Q46CT toroidal conductivity system is designed for online monitoring of chemically aggressive process solutions. This sensor consists of two metallic ribbon coils that are fixed in place by the sensor jacket material. The drive coil establishes a strong magnetic field around the sensor body which induces a current in the process solution. The sensing coil is used to measure the induced current in the process solution. The magnitude of this current proportional to the conductivity of the process solution.

The toroidal sensor is available in Noryl to ensure sensor wetted materials are chemically resistant to both strong acids and strong bases. Sensor material is also non-conductive, thereby isolating the sensor from electrical noise and ground loops that can influence the integrity of the measurement. This material also makes the sensor resistant to electrode coating, as most substances do not adhere to the sensor material.

Sensors can be submersion-mounted using the ¾" NPT pipe thread at the back of the sensor for easy installation in open tanks. The sensor may also be pipe-mounted using the special 2" CPVC tee fitting which has an alignment key to automatically orient the sensor to the sample flow.

A Pt1000 RTD in the sensor body provides temperature input for both display and automatic temperature compensation of the conductivity measurement.

Features

• Concentration version for direct display of chemical concentrations
• Expansion board to add a third 4-20 mA analog output or to add three additional non-isolated low power relays
• Wide range capability, with selectable ranges of 0-200.0µs up to 0.2.000 S provide maximum application flexibility
• Power options include universal 100-240 VAC ±10% or 12-24 VDC
• Two isolated 4-20 mA outputs are standard with an option for a third output if required. Default setting provides analog outputs for conductivity and temperature
• Standard PID control function assignable to one analog output
• Available in either Profibus DP, Modbus RTU or Ethernet IP
• Three SPDT relays are standard with relay functions programmable for alarm, control or trouble indication. Three additional low power relays available as an option.
• NEMA 4X (IP-66) enclosure is suitable for wall, pipe or panel mounting
• Black-lit large LCD display provides clear visibility in any lighting conditions. A scrol second line on the display provides additional information and programming prompts.

Conductivity monitors can be used to monitor and display concentration or acids or bases used in various chemical process applications. The Q46CT is available with pre-loaded tables allowing direct display of concentration for solutions or sodium chloride (NaCl), hydrochloric acid (HCl), potassium hydroxide (KOH) and sodium hydroxide (NaOH).

In addition to these standard tables, the user may enter their own table data for other chemicals or may edit the standard tables supplied by ATI. Custom tables require data on both concentration vs conductivity and temperature vs conductivity for the chemical of interest.

Specifications - Monitor

Specifications - Sensors

Ordering Information

Other configurations available For pricing, please call AFC International at 1-, 219-987-6825 or 219-987-6826 or  sales@afcintl.com